Session Table Station Number = * Station Constraint = Y Satellite Number = * Satellites Session 1 = YYYYYYYYYYYYYYYYYYYYYYYYYY ; Y/N Satellite Constraint = Y ; Y/N all a e i n w M rad1 rad2 rad3 rad4 rad5 rad6 rad7 rad8 rad9 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 Type of Analysis = 0-ITER ; 0-ITER/1-ITER/2-ITER/1-CLEAN/2-CLEAN/3-CLEAN Data Status = RAW ; CLN/RAW Choice of Observable = LC_HELP ; L1_SINGLE/L1&L2/L1_ONLY/L2_ONLY/LC_ONLY/ ; L1,L2_INDEPEND./LC_HELP Choice of Experiment = RELAX. ; BASELINE/RELAX./ORBIT Ionospheric Constraints = 0.0 mm + 99.00 ppm Tropospheric Constraints = NO ; YES/NO Zenith Delay Estimation = YES ; YES/NO Number Zen = 25 ; number of zenith-delay parameters Zenith Constraints = 0.50 ; zenith-delay a priori constraint in meters (default 0.5) Zenith Model = PWL ; PWL (piecewise linear)/CON (step) Zenith Variation = 0.02 100. ; zenith-delay variation, tau in meters/sqrt(hr), hrs Atmospheric gradients = YES ; YES/NO (default no) Number grad = 3 ; number of N/S or E/W gradient parameters per station per session Gradient Constraints = 0.01 ; gradient at 10 deg elevation in meters Station Constraint = Y ; Y/N Ambiguity resolution WL = 0.15 0.25 1000. 10. 1000. ; FIXDRV, SOLVE > 9.26 defaults Ambiguity resolution NL = 0.15 0.25 1000. 10. 1000 ; FIXDRV, SOLVE > 9.26 defaults H-file solutions = LOOSE-ONLY ; ALL ; LOOSE-ONLY Geodetic Datum = GEOCENTRIC ; GEOCENTRIC/WGS84/NAD82/WGS72 Reference System for ARC = IGS92 ; WGS84/WGS72/MERIT/IGS92(default) Initial ARC = YES ; YES/NO default = NO for BASELINE/KIINEMATIC, YES for RELAX/ORBIT Update T/L files = L_ONLY ; T_AND_L (default), T_ONLY, L_ONLY, NONE Update tolerance = .001 m ; Update l-file if site adjustment bigger than tolerance Final ARC = NO Yaw Model = YES ; YES/NO default = YES Delete eclipse data = NO ; ALL/NO/POST (Default = NO); 30 mins post shadow removal is ; hardwired for ALL/POST Clean Option = AUTCLN ; SINCLN/AUTCLN(default)/DBLCLN AUTCLN Command File = autcln.cmd ; Filename; default none (use default options) AUTCLN Postfit = YES ; Run autcln for postfit run Delete AUTCLN input C-files = I ; YES/NO default = NO ; I -- Intermediate keep (stops) second model Use N-file = Y ; Y/N (default no): automatic procedure to reweight by station Earth Rotation = 3 ; Diurnal/Semidirunal terms: Binary coded: 1=pole 2=UT1 default=3 Estimate EOP = 15 ; Binary coded: 1 wob 2 ut1 4 wob rate 8 ut1 rate Wobble Con = 0.01 0.01 ; default = 3. 0.3 arcsec arcsec/day UT1 Con = 0.00001 0.01 ; default = .2 0.02 sec sec/day Tide Model = 3 ; Binary coded: 1 earth 2 freq-dep 4 pole 8 ocean default=1 Antenna Model = ELEV ; NONE/ELEV/AZEL default = NONE Radiation Model for ARC = BERNE ; SPHRC/BERNE/SRDYB/SVBDY default = BERNE Inertial frame = J2000 ; J2000/B1950 Processing Agency = SIO SCANDD control = NONE ; YES/NONE Decimation Factor = 4 ; Decimation factor in solve Quick-pre observable = LC ; For 1st iter or autcln pre, default same as Choice of observable Quick-pre decimation factor = 10 ; 1st iter or autcln pre, default same as Decimation Factor Quick-pre Elevation Cutoff = 10 ; Prefit elevation cutoff angle. #tation Error = ELEVATION 4.3 7.0 ; 1-way L1 , a**2 + b**2/sin(elev)**2 in mm, default = 4.3 7.0 Station Error = ELEVATION 10. 0.0001 ; 1-way L1 , a**2 + b**2/sin(elev)**2 in mm, default = 4.3 7.0 Not needed any more: Measurement Error = 10.0 mm + 0.00 ppm Notes: PREFIT : Prefit manipulations including cleaning (no solution) QUICK : Quick solution 0-ITERATION : Full solution with good prior station coordinates and orbits 1-ITERATION : Full solution with approximate prior station coordinates 2-ITERATION : Full solution with approximate prior station coordinates and orbits 1-CLEANED : Cleaned data, update orbits and partials, new solution 2-CLEANED : Cleaned data, update partials, new solution 3-CLEANED : Cleaned data, new solution Optional controls: Data Status = CLN ; CLN/RAW Initial ARC ; YES/NO default = NO for BASELINE/KINEMATIC, YES for RELAX/ORBIT Final ARC ; YES/NO default = YES SOLVE-only = YES ; YES/NO default = NO Radiation Model for ARC ; SPHRC/ROCK4 default = SPHRC Reference System for ARC ; WGS72/WGS84/MERIT/IGS92 (default = IGS92) Tabular interval for ARC ; 900. seconds (new default), 1350. seconds (old default) Stepsize for ARC ; 75. seconds (new default), 168.75 seconds (old default) Earth Rotation ; Diurnal/Semidirunal terms: Binary coded: 1=pole 2=UT1 default=3 Estimate EOP ; Binary coded: 1 wob 2 ut1 4 wob rate 8 ut1 rate EOP Constraints ; default = 3. 3. 0.2 (x y arcsec, UT1 sec) Antenna Model ; NONE/ELEV/AZEL default = NONE Tide Model ; Binary coded: 1 earth 2 freq-dep 4 pole 8 ocean default = 1 Yaw Model ; YES/NO default = YES Ambiguity resolution WL ; default = 0.15 0.15 1000. 10. Ambiguity resolution NL ; default = 0.15 0.15 1000. 10. Type of Biases : IMPLICIT (default for quick), EXPLICIT (default for full) H-file solutions ; ALL ; LOOSE-ONLY Export Orbits ; YES/NO default = NO Orbit id ; 4-char code read only if Export Orbits = YES Orbit Format ; SP1/SP3 (NGS Standard Products) Orbit organization ; 3-char code read only if Export Orbits = YES Delete all input C-files ; YES/NO default = NO Delete MODEL input C-files ; YES/NO default = NO Delete SINCLN input C-files ; YES/NO default = NO Delete DBLCLN input C-files ; YES/NO default = NO Delete AUTCLN input C-files ; YES/NO default = NO Update T/L files ; T_AND_L (default), T_ONLY, L_ONLY, NONE (Applies only to update for full solution after quick) Clean Option ; SINCLN/AUTCLN(default)/DBLCLN AUTCLN Command File ; Filename; default none (use default options) Edit AUTCLN Command File ; YES/NO; default = NO Iteration ; CFILES / XFILES (default) Use I-file = N ; Use I-file (Y/N) (default Y) Select Epochs ; Enter start and stop epoch number (applies only to SOLVE) X-compress = YES ; Uncompress/compress X-files default = NO Run CTOX = YES ; Make clean X-files from C-files default = NO